Home page

MC-Ⅱ Pulse bag dust catcher

MC-Ⅱ type pulse bag filter has been greatly improved on the basis of the original Ⅰ type, which is more reasonable in structure, with lower blowing pressure, good dust-cleaning effect and small maintenance workload, and it is the more ideal pulse bag filter at present.

Graphic Details

The characteristics and structure principle of MC-Ⅱ type pulse bag filter:

1. On the basis of retaining the advantages of the original MC-Ⅰtype dust collector, MC-Ⅱtype pulse bag filter adopts QMF-20P pulse valve with low resistance, which makes the service life of the control system of the dust collector and the filter bag etc. more than double than that of MC-Ⅰtype and reduces the maintenance workload.

2. The compressed air used for dust cleaning has been reduced from the original 5-7kg/cm2 pressure to the present 3kg/cm2 pressure, but the dust cleaning effect can still reach the effect of 5-7kg/cm2 pressure, thus expanding the scope of use.

3. Due to the structural improvement, the tightness of the equipment is enhanced, and the air leakage can be lower than 10%, which further improves the product quality.

4. Reform the uncovering device, filter bag fixing method, for equipment overhaul and maintenance to improve the labor conditions.

5. The blowing device has increased the protective cover, and the cover structure has adopted rainproof measures, so that the dust collector does not need to set up another rainproof shed when placed in the open air, which reduces the construction investment.

6. The original churn is removed from the ash-cleaning part, and the YJD series automatic rotary ash-removal valve combined with wind shutter is installed. Expanding the use of ash cleaning effect, reducing maintenance, sealing tight ash discharge fast.

And from the structure and pulse valve reform, solved the problem of open-air placement and low compressed air pressure. Applicable to machinery, metallurgy, rubber, flour, chemical and pharmaceutical, carbon building materials and mining units.